Manual.ly Logo

Worx WX261.9 Bruksanvisning

0,0 · 0 Vurderinger

PDF-manual · 128 sider

Nynorsk

M: OA-GPT-5-NAN
side

/ 128

Loading...
54f460346d3d5a3fb40e52c772826920c03a page c
12
20V Brushless Impact Driver
EN
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
a
h
= 7.446m/s
2
Uncertainty K = 1.5m/s
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
4.INTENDED USE
This tool is intended for the fastening and loosening of
bolts, nuts and various threaded fasteners. This tool is
not intended for use as a drill.
5.OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the Battery Pack Condition See Fig .A1
Removing the Battery Pack See Fig. A2
Charging the Battery Pack See Fig. A3
Installing the Battery Pack See Fig. A4
ASSEMBLY AND ADJUSTMENT
Assembling the Hook and Bit Clip
See Fig. B1,
B2, B3, B4
Inserting the Bits See Fig. C1
Removing the Bits See Fig. C2
Forward / Reverse / Lock
WARNING Never change the
direction of rotation when
the chuck is rotating, wait until it
is stopped!
See Fig. D1,
D2, D3
OPERATION
Operating the On/Off Switch
WARNING Do not operate for
long periods at low speed
because excess heat will be
produced internally.
Variable 3-Speed
Press the red button to select
preferred rotation speed, levels 1 to 3,
with 3 being the fastest. The operating
speed will be illuminated.
See Fig. E

Chat med din Worx WX261.9-manual ved hjelp av AI

Få umiddelbare AI-svar fra din Worx WX261.9-manual

Spør hva som helst om Worx WX261.9. Svarene kommer fra denne manualen, med de sidene de er basert på.

WX261.9 Vedlikeholdsplan

Für die Verwendung
Batterie vor der Wartung entfernen

Entfernen Sie immer den Akkupack vom Gerät, bevor Sie Einstellungs-, Service- oder Wartungsarbeiten durchführen.

Vis i manualen (side 12)
Bei Bedarf
Mit trockenem Tuch reinigen

Verwenden Sie niemals Wasser oder chemische Reiniger. Wischen Sie mit einem trockenen Tuch ab, um Staub und Schmutz zu entfernen.

Vis i manualen (side 12)
Bei Bedarf
Lüftungsschlitze sauber halten

Stellen Sie sicher, dass die Motorlüftungsschlitze staubfrei gehalten werden, um Überhitzung zu vermeiden und einen ordnungsgemäßen Betrieb zu gewährleisten.

Vis i manualen (side 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend WX261.9?

Ja Nei

Frequently Asked Questions

A

El WX261.9 Nitro ofrece hasta 260 Nm de par máximo, lo que lo hace adecuado para tareas de apriete y aflojado pesadas cuando se usa con una batería Worx 20V adecuada.

Er dette svaret nyttig?

A

Sí —utiliza un motor sin escobillas, que proporciona mayor eficiencia, mayor vida útil del motor, menos mantenimiento y, a menudo, mejor autonomía en comparación con motores con escobillas.

Er dette svaret nyttig?

A

La herramienta tiene sistemas de protección contra sobrecarga, sobrecalentamiento y batería baja que hacen parpadear el LED y cortan la alimentación para proteger el motor y la batería. También cuenta con bloqueo de avance/retroceso, ranuras de ventilación y guías de seguridad para el manejo y eliminación de baterías.

Er dette svaret nyttig?

A

El WX261.9 forma parte de Worx 20V PowerShare; los modelos de batería compatibles van de 1,5 Ah a 6,0 Ah (p. ej., WA3550–WA3641) y los cargadores de 0,4A a 4,0A. Use únicamente baterías y cargadores Worx especificados para seguridad y cumplimiento de la garantía.

Er dette svaret nyttig?

A

La herramienta ofrece tres rangos de velocidad variable: aprox. 0–900, 0–2400 y 0–3000 rpm, con tasas de impactos correspondientes hasta ~4000 ipm en el ajuste más alto. Un botón rojo selecciona el nivel de velocidad e ilumina el ajuste activo.

Er dette svaret nyttig?

A

Retire la batería antes del mantenimiento, mantenga limpias las ranuras de ventilación, límpielo con un paño seco (sin agua ni limpiadores químicos), guárdelo en un lugar seco y siga los ciclos de carga recomendados. El diseño sin escobillas minimiza el mantenimiento rutinario.

Er dette svaret nyttig?

A

Un LED que parpadea rápidamente indica que se activó el sistema de protección (sobrecarga, sobrecalentamiento o batería baja), que corta la alimentación para proteger los componentes. Suelte el gatillo, subsane la causa (enfriamiento, reducir la carga, recargar) y reanude cuando sea seguro.

Er dette svaret nyttig?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Motor sin escobillas para mejor eficiencia, menos mantenimiento y mayor vida útil.
  • Alto par máximo (260 Nm) adecuado para tareas de apriete pesadas.
  • Control variable de tres velocidades para precisión y flexibilidad de tareas.
  • Herramienta ligera sin batería (1,1 kg) con mango de agarre blando y gancho para colgar para comodidad y portabilidad.
  • Protecciones integradas (sobrecarga, sobrecalentamiento, batería baja) y luz de trabajo LED para operación segura.
VS

Disadvantages

  • El nivel de vibración declarado (ah ≈ 7,446 m/s²) puede requerir medidas antivibración para uso prolongado.
  • Nivel de ruido (LpA ≈ 83,6 dB(A)) requiere protección auditiva durante la operación.
  • La herramienta no está destinada ni optimizada para perforar —limitada a aplicaciones de apriete.
  • La batería y el cargador deben ser especificados por Worx; los cargadores de terceros no son compatibles.
  • Herramienta vendida sin batería —las baterías y el cargador son compras adicionales para su uso completo.
M: OA-GPT-5-NAN

Produkt Spesifikasjoner

Type

Slagtrekker

Batteri

20V, Li-ion

Tomgangshastighet

0-900/0-2400/0-3000/min

Slagfrekvens uten belastning

0-1200/0-3300/0-4000/min

Dreiemoment

maks. 260 Nm

Verktø yholder

1/4" Bitsholder

Funksjoner

Forover-/reversrotasjon, Hastighetskontroll, Slagfrekvenskontroll, Flere hastigheter, LED-arbeidslys, Mykt grep, Børsteløs motor, Belteklemme

Vekt

1,10 kg (uten batteri)

Leveringsomfang

uten lader og batteri

M: GO-GEM-FL-25

Produkt Beskrivelse

Worx WX261.9 Nitro 20V PowerShare Cordless Impact Wrench solo Manual

El Worx WX261.9 Nitro 20V PowerShare Llave de impacto inalámbrica es un atornillador de impacto sin escobillas, compacto y ligero, diseñado para apretar y aflojar tornillos, tuercas y diversos sujetadores roscados. Alimentado por el sistema 20V PowerShare (nominalmente 18V, medido hasta 20V), esta herramienta sin batería de 1,1 kg ofrece hasta 260 Nm de par máximo y tres rangos de velocidad variable para tareas que van desde atornillados ligeros hasta fijaciones de alta resistencia.

Equipado con un motor sin escobillas para mayor eficiencia y vida útil, el WX261.9 ofrece velocidades en vacío seleccionables por pasos (aprox. 0–900, 0–2400, 0–3000 rpm) y tasas de impactos correspondientes para un control preciso. Un selector variable de 3 velocidades y un mango de agarre blando permiten ajustar el rendimiento según materiales y sujetadores. La herramienta acepta puntas de 6,35 mm (1/4") e incluye características como luz de trabajo LED, control de avance/retroceso con bloqueo, clip para punta y gancho para mayor comodidad, y un indicador de capacidad de batería cuando se usa con baterías Worx compatibles.

La seguridad y la durabilidad son fundamentales: la llave incluye múltiples sistemas de protección que cortan la alimentación ante sobrecarga, sobrecalentamiento o batería baja. Se especifican las emisiones acústicas y de vibración (LpA ≈ 83,6 dB(A); vibración declarada ah ≈ 7,446 m/s²), por lo que se recomienda protección auditiva y prácticas antivibración para uso prolongado. El manual enfatiza revisiones de rutina, carga correcta de baterías (usar sólo cargadores Worx), manipulación segura de baterías y eliminación/reciclaje adecuado de baterías y residuos eléctricos.

El mantenimiento es mínimo —el diseño sin escobillas reduce el cuidado— pero los usuarios deben mantener las ranuras de ventilación limpias, evitar agua o limpiadores químicos y retirar la batería antes de cualquier servicio. La herramienta está pensada únicamente para tareas de apriete, no como taladro. Una sección de solución de problemas cubre fallas comunes como orientación de carga incorrecta, tiempo de funcionamiento reducido y comportamiento de apagado protector.

Notas:

  • Las baterías y cargadores compatibles se enumeran por capacidades (1,5Ah–6,0Ah) y cargadores (0,4A–4,0A). Use únicamente cargadores y baterías Worx especificados.
  • La herramienta cuenta con protección térmica y contra sobrecarga que hará parpadear el LED y cortará la alimentación si se superan los límites; deje enfriar antes de reiniciar.
  • Observe los rangos de temperatura recomendados para funcionamiento y carga (uso/almacenamiento: 0°C–45°C; carga: 0°C–40°C).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly